40 foot Gooseneck Tandem Chassis
We sale 40 foot Gooseneck Tandem Chassis, made in USA.
General Specifications for 40 foot Gooseneck Tandem Chassis for sale.
Function |
Carries one 40 ft ISO Container Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
Overall Chassis Length |
40ft. 6in. |
Overall Chassis Width |
96 inches |
Tandem Location |
54 inches |
Kingpin Location |
30½ inches from rear face of front bolster. |
Maximum Rear Height |
48 in. |
Main Frame Width |
40 in. |
Main Beams |
Wide flange I-Beam 12 inch deep, 19 lb/ft, hot rolled |
Gooseneck Beams |
5 inches deep I-Beam, fabricated with ½ inch x 4-inch flanges and ¼ inch x 4 inch web |
Cross Member |
All cross members are formed from 10-gauge steel |
Upper Coupler Assembly |
Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by ¼ inch formed channels |
Front Bolster |
¼ inch thick channel 9 inches high x 6 inches deep with 10 gauge stiffeners |
Rear Bolster |
Box type with 3/8 inch x 8 inch top plate and ¼ inch thick, formed channel lower member with ICC light holes. A small license plate bracket will be mounted on the under side. |
Twist Lock & Slide Pins |
Meets ISO standards and requirements. |
ICC Bumper |
4 inch x 4inch x 3/16 inch Tube step bumper. Main beam and bumper struts are extended 2 inches to protect rear bolster. (No rubber dock bumpers) |
Landing Gear |
Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
Landing Gear Axle Type |
Standard |
Landing Gear Foot Group |
10 in. by 10 in. Low profile sandshoe |
Crank Handle Location |
Curb side handle |
Suspension |
Hutch |
Axle Quantity |
Two Axles |
Suspension Type |
Spring-Ride |
Axle Centers |
49 inch |
Springs |
Three Leaf |
Hub Type |
5 spoke |
Hub Material |
Steel |
Hub Manufacturer |
KIC |
Drum |
Inboard mounted (5 spoke) |
Rim/Wheels |
7 1/2 X 20 tube type |
Wheel/Rim Color |
White |
Rim Spacer |
4″ Corrugated |
Tires |
Cheetah Supplied |
Tire Size |
10:00 X 20 |
Tire Inflation System |
None |
Axle Vendor |
Meritor |
Axle Type |
TN |
Wall Thickness |
1/2 inch |
Axle Track |
71.5 |
Brake Lining Options |
Standard |
Lubrication |
Grease (EP) |
Slack Adjusters |
Bendix 5 1/2 inch |
Brake System Vendor |
WABCO |
Brake System Type |
2S1M |
Brake Chambers |
Haldex |
Hubodometer |
None |
Electrical System |
12 volt, 7-way split pin receptacle plug; modular wiring harness |
Light Vendor |
TruckLite |
Light Attachment |
Grommet mounted |
Light Type |
Incandescent |
Metal Preparation |
Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
Primer |
70% Zinc Rich Primer |
Topcoat |
Urethane Topcoat |
Color |
Black |
Markings |
FHWA plate, tare weight, 2 small Cheetah logos. |
Customer Decals |
Furnished by Customer |
Conspicuity |
Meets DOT requirements |
Registration Holder |
Plastic with clear screw on top |
Mud Flaps |
Cheetah Supplied |
Mud Flap Mounting |
3 mounting bolts |
Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
GVWR |
65,000 lbs |
Weight |
Approximately 6,500 lbs. + 2% |