20 foot Container Chassis
We sale 20 foot Container Chassis, made in USA.
General Specifications for 20 foot Container Chassis for sale.
|
unction |
Carries one 20 ft ISO Container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
|
Overall Chassis Length |
(extended) 26 ft 11 inches |
|
Overall Chassis Width |
96 inches |
|
Tandem Location |
49 inches |
|
Kingpin Location |
15 inches from front of chassis |
|
Slide Range |
44 inches |
|
Maximum Rear Height |
52 1/2 inches |
|
Main Beams |
Wide flange I-Beam 12 inch deep, 19 lb/ft, hot rolled steel, ASTM A572-50 |
|
Forward Beams |
6 1/2 inch deep I-Beam, fabricated with 1/2 inch x 5- inch grade 65 top flange and 1/2 inch x 6 inch grade 65 bottom flange and 1/4 inch web |
|
Cross Member |
All cross members are formed from 10-gauge steel |
|
Upper Coupler Assembly |
Pick up plate is 5/16” thick and extends approximately 33” behind the kingpin and is reinforced fore and aft by 5/16 inch formed channels |
|
Front Bolster |
Box type with 3/8 inch x 8 inch top plate and ¼ inch |
|
Rear Bolster |
Box type with 3/8 inch x 8 inch top plate and ¼ inch |
|
Twist Lock & Slide Pins |
Meets ISO standards and requirements |
|
Slider Mechanism |
Lock engagement ensured by two spring-loaded pins |
|
ICC Bumper |
4 inch x 4inch x 3/16 inch Tube step bumper. Main beam and bumper struts are extended 2 inches to protect rear bolster. (No rubber dock bumpers) |
|
Landing Gear |
Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
|
Landing Gear Axle Type |
Standard |
|
Landing Gear Foot Group |
10 in. by 10 in. Low profile sandshoe |
|
Crank Handle Location |
Curb side handle |
|
Suspension |
Hutch |
|
Axle Quantity |
Two Axles |
|
Suspension Type |
Spring-Ride |
|
Axle Centers |
49 inch |
|
Springs |
Three Leaf |
|
Hub Type |
5 spoke |
|
Hub Material |
Steel |
|
Hub Manufacturer |
KIC |
|
Drum |
Inboard mounted (5 spoke) |
|
Rim/Wheels |
7 1/2 X 20 tube type |
|
Rim Spacer |
4″ corrugated |
|
Tires |
Cheetah Supplied |
|
Tire Size |
10:00 X 20 |
|
Tire Inflation System |
None |
|
Axle Vendor |
Meritor |
|
Axle Type |
TN |
|
Wall Thickness |
1/2 inch |
|
Axle Track |
71.5 |
|
Brake Lining Options |
Standard |
|
Lubrication |
Grease (EP) |
|
Slack Adjusters |
Bendix 5 1/2 inch |
|
Brake System Vendor |
WABCO |
|
Brake System Type |
2S1M |
|
Brake Chambers |
Haldex |
|
Hubodometer |
None |
|
Electrical System |
12 volt, 7-way split pin receptacle plug; modular wiring harness |
|
Light Vendor |
TruckLite |
|
Light Attachment |
Grommet mounted |
|
Light Type |
Incandescent |
|
Metal Preparation |
Clean, dry steel and NACE No. 3 /SSPC-SP-6 |
|
Primer |
70% Zinc Rich Primer |
|
Topcoat |
Urethane Topcoat |
|
Color |
Black |
|
Markings |
FHWA plate, tare weight, 2 small Cheetah logos. |
|
Customer Decals |
Furnished by Customer |
|
Conspicuity |
Meets DOT requirements |
|
Registration Holder |
Plastic with clear screw on top |
|
Mud Flaps |
Cheetah Supplied |
|
Mud Flap Mounting |
4 mounting bolts |
|
Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTMA607, |
|
GVWR |
55,000 lbs |
|
Weight |
Approximately 6,600 lbs. + 2% |
